This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky
- The stiffest and most aero integrated handlebar and stem system - All carbon construction - Di2 compatible with integrated junction box compartment and wiring conduits - Compact 125mm drop, 80mm reach - 395g
For all the off-road drop bar fans, Velo Orange offers the Far Bar, an affordable off-road drop bar. With off-road drop bars, most riders have the bars set up at the same height as they would have flat bars set to. Most of the time you are riding, your hands are on the hoods of the brake levers. Then, for steep descents, put your butt back behind the saddle and use the drops to get a better grip on the brake levers. You can run brifters or standard road brake levers on them and use bar end shifters as well. The Daija Cycleworks crest appears on each side of the 31.8 mm clamp area. These bars are a little different then road bars in terms of measuring the width. The listed width - 44cm or 48 cm - is measured center of the drops to centre of the hoods. The overall width is 585mm for the 44cm size, 625mm for the 48cm size. - Weight: 292g - Drop: 110mm - Drop Bend Style: Compact - Reach: 76mm - Material: Aluminum - Bar Top Style: Round
Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
Velo Orange's Tourist bar is a "North Road" style bar rendered in polished aluminum alloy. It's similar to the bars used on many classic British roadsters. The clamp area is 25.4mm in diameter. The width is 570mm and the reach is 180mm; it has about 70mm of rise. They sweep back about 60-degrees, and the grip area is about 160mm long. The Tourist accepts regular MTB (22.2mm) grips, brakes, and shifters, but not inverse levers or bar-end shifters.
The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface. - Upsweep: 5° - Backsweep: 9° (760mm bars) - Backsweep: 7° (all other bars)
Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°
Proven shape, proven width, proven materials, and the artistic touch of Troy Lee Designs: voilà, the TRUVATIV CoLab TLD Carbon riser bars. These bars are stiff, tough, dependable, and give you all the comfort and positive steering feel you want. This is art on your bars for artistry in the corners. - Stiff, precise, and width-optimized for enduro, trail and aggressive xc - Carbon fiber perfection - DESCENDANT geometry from their best enduro rider’s input - Signature Troy Lee Designs style
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
Thomson's Carbon Road Handlebars are as light, stiff and strong as they are beautiful. Thomson crafts them of three types of unidirectional Toray carbon, molding them in one piece and putting a mild wing shape on top for a nice platform and support for your hands. And you get the perfect bend for riding in all hand positions with plenty of clearance for your wrists at any bar angle. Plus, there are provisions on the bottom for the cables so you get a tidy tape job and even more comfort.
Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.
Thomson MTB Aluminum Handlebar 800mm 35mm Rise 9degree back 5 degree up 35.0 clamp. - Produced from 7050 alloy then butted and tapered for optimal fatigue life - Produced with an advanced hydraulic forming press to ensure consistent wall thickness and exact tolerances - Bar Clamp Diameter: 35.0mm
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
Upgrade the front end of your favorite ride with Thomson's MTB Titanium Handlebars. These beautiful bars come in either 6 or 12 degrees of sweep. Besides being light, stiff, corrosion-proof and incredibly durable, titanium damps vibrations for comfort making easy work of rough and challenging terrain. Install these sweet bars on your daily ride, race rig or trail-crusher and enjoy them for years to come.
Upgrade the front end of your favorite ride with Thomson's MTB Titanium Handlebars. Besides being light, stiff, corrosion-proof and incredibly durable, titanium damps vibrations for comfort making easy work of rough and challenging terrain. Install these sweet bars on your daily ride, race rig or trail-crusher and enjoy them for years to come.
The Cheater Bar is built from triple butted 4130 CroMoly steel and is tough enough to handle all of the abuse you will inflict upon it on the trail. Surly made two versions: a clear coated raw steel version and a black ED coated version. Both are CroMoly steel. - Material: Cromoly steel - Clamp diameter: 31.8mm - Width: 780mm - Rise: 0mm - Sweep Angle: 11 degrees - Color: Clear Coat Silver and E.D. coated Black - Weight: 400g
The Surly Corner Bar is for off-road riders who want to give drop bars a try without swapping out the drivetrain and brake levers on their current mountain setup. Does that make it an economical option for fresh excitement on the trail? Yes, it does. - Chromoly steel with custom-butted tubing - 22.2mm grip diameter - 25.4mm clamp diameter - One set of 25.4/31.8 x 60mm Problem Solvers shims included
If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that's your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don't you worry. Surly added cut marks so you can easily make it so. - Material: CroMoly steel - Clamp diameter: 31.8mm - Width: 735mm; Cut marks for 685mm - Rise: 0 - Sweep Angle: 34 degrees - Weight: 709g - Color: E.D. coated Black
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise
The Surly Truck Stop Handlebar combines the benefits of a drop bar with those of a riser bar. Offering a variety of hand positions for comfort over the long haul, it also features 30mm of rise for a more upright and relaxed riding position. With a clean aesthetic, it’s a great option for taller riders looking for more rise and for bikes with a low-cut steer tube. - Lightweight, aluminum construction - Available in various widths - 31.8mm clamp diameter
- Award-winning Vibrocore foam core provides vibration-damping, proven to reduce arm pump and hand-numbness - 25° aggressively flared, wide drop bar for true off-road performance and comfort - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding in a more upright, balanced stance - 8mm bar clamp extends through the top section, providing enhanced hand support and comfort without multiple wraps of tape to increase diameter - Round profile upper section facilitates a wide range of rider/hand positions and maximizes grip on the bars in rough terrain - Recommended for: ASTM 3, Gravel Features: - Key Technologies: Vibrocore, On-Off Road Geometry - Material: Zirconium Doped 7-Series Alloy - Width, Hood to Hood (c-c): 420 / 440 / 460 / 480 / 500 / 520mm - Width, Barend to Barend (o-o): 562 / 582 / 602 / 622 / 642 / 662mm - Weight (g): 345 / 350 / 355 / 370 / 375 / 380 - Drop/Reach: 110mm / 65mm (all sizes) - Flare: 25° - Ramp: 14°
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos
- 12° moderately flared, medium width drop bar balances off-road performance, with on-road aerodynamics and comfort - Vibrocore foam core reduces transmission of harmful frequencies of vibration, and increases bar fatigue life and ultimate strength - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding stance and long days in the saddle on mixed terrain - 31.8mm bar clamp zone, and aerodynamic ergo top section enhances hand comfort over longer rides, without limiting range of rider/hand positions - 21.6mm inner diameter barends, allow use of most barend shifters - KEY TECHNOLOGIES: Vibrocore, On-Off Road Geometry - MATERIAL: Zirconium Doped 7-Series Alloy - WIDTH HOOD TO HOOD (c-c): 420 / 440 / 460mm - WIDTH BAREND to BAREND (o-o): 498 / 518 / 538mm - WEIGHT: 355 / 360 / 365g - DROP / REACH: 10mm / 65mm (all sizes) - BAR CLAMP / TOP SECTION: 31.8mm Ergo Profile - FLARE: 12° - RAMP: 14°
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos