The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop
Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)
Light & Motion's Urban 500 lights up your daily commute. It's light, bright, and rugged for urban and off-road adventures alike. Featuring: • 500 Lumen output certified to the FL-1 Standard. • Engineered with top of the line CREE LED and enhanced firmware. • It is the only light in its class with an accurate 4 level battery charge status indicator so you know if you have the juice to get home. • Custom engineered reflector optimizes the light to provide the most efficient and effective distribution of light for cycling. • Amber Side lighting for a full 180 degrees of visibility. • Designed to be mounted on your handlebar or helmet (tool-free system). • Lightweight aluminum body with integrated heat sink fins. • MicroUSB Rechargeable (fully charges in 5 hours). • Low battery warning and auto shut-off to prevent damage. • Multiple power settings. Runtime/Lumens • High 1:30/500 • Med 3:00/225 • Low 6:00/115 • Pulse 12:00/115
Planet Bike's Blaze is a commuter's dream that cuts a swath of visibility through dark, moonless nights. The Blaze boasts a Nichia half-watt white LED with a brilliant beam specifically designed not only to be seen, but also to let you see where you're going. This great light features flashing and steady modes, and a tool-free quick-release handlebar mount so you can install and remove the light in seconds. Plus, the included 2 AA batteries offer run times of up to 100 hours.
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
Vya Smart Lights are a revolutionary concept incorporating technology to provide effortless safety in an ultra-compact, convenient design. Auto-on sensors, waterproof bio-renewable construction, and innovative safety features create the most technically advanced light available for cyclists. The Vya Commuter Combo is the perfect solution for riders that pedal in high traffic areas and want the added assurance of SafePulse visibility day and night. Features - 150 Lumen Headlight & 50 Lumen Taillight with variable SafePulse beam pattern optimized for maximum visibility day and night - Smart sensor technology senses motion and automatically turns lights on when inserted into mount; Auto-off when bike is parked removed from mount - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Beam patterns optimized to give a wide swath of light that can be seen clearly from the rear and side ideal for city riding - Extra long run-time perfect for riders who do not want to charge lights on a daily basis, Low battery status is indicated by rapidly flashing sidelights - USB Mount Receptor allows lights to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; lights will not turn on when removed from mount and slipped into a pocket or bag - Easy direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Headlight Specifications - Lumens: 50 (high), 50 (SafePulse) - Runtime: 480 min (high), 480 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min
Planet Bike's Beamer 1 & Blinky 3 Light Set will keep you safe when it's dark. For excellent visibility the Beamer headlight provides a focused LED beam and the Blinky taillight boasts 3 red LEDs. There are also quick-release mounts for easy on/off.
Light & Motion's Taz 1200 is the all-in-one handlebar light that outshines many car headlamps and fits in the palm of your hand. Perfect for the most technical singletrack or critical commute where Lumen output is a priority. Featuring: - 1200 Lumen output certified to the FL-1 Standard - Engineered with a 3 LED array using the highest level CREE LEDs. - Sealed, waterproof design – up to 1m. - Custom engineered reflector/optics diffuses the bottom LED to cover an ultra-wide spread down in front and focuses the top two LEDs to penetrate the darkness with a far-reaching beam, without wasting any light. - Beam pattern was engineered to maximize visibility at high velocity with ample beam distance lead-time and the widest beam angle for the sharpest turns. - Side lighting to maximize visibility on roadways with a dedicated button to toggle the side lights on/off. - Secondary Race Mode simplifies your settings to switch between high power with 2 hours run time and low power with 4 hours. - Accurate battery status indication illuminates the power button with three different colors to clearly display remaining battery life with 4 levels. - Universal tool-free mounting system. - Ultralight aluminum heat sink with tapered fin design. - Micro-USB Rechargeable - Charge rate indicator illuminates the power button with three colors to display speed of charge. - Low battery warning and auto shut-off to prevent damage. - Multiple power settings with cruise and secondary race mode Run time/Lumens: - High 1:30 / 1200 - Med 3:00 / 600 - Low 6:00 / 300 - Pulse 9:00 / 300 - Flash 18:00 / 300 - Race High 2:00 / 1000 - Race Low 4:00 / 450
The NiteRider Sabre 80 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye catching visibility in both day and night. With the addition of amber colored side lights, the Sabre 80 provides 180 degrees of protection. Daylight Visible Flash (DVF) 80 lumen super bright tail light Easy on and off seat post strap mount with quick release tab Amber side lights for 180 degrees of visibility Convenient USB rechargeable Be Seen by cars = Be Safe FL1 Standard IP64, water resistant Lumen Output: 80 Run Time : 1:30 – 10:30hrs Charge Time: 1:30hrs Weight: 28g Battery: Li-Po WARRANTY The Sabre 80 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES LED Tail Light Seatpost Mount USB Cable
The Recon HL500 is the perfect multi-function light for use on handlebars or helmets. It features abundant light output in a lightweight design. - Lumens and runtime certified to the ANSI-Standard - Focused optics with side light design for over 270 degrees visibility - Heat-dissipating CNC-machined aluminum structure - Power status indicator can let you know how much run-time to go before powering off - Includes adjustable GoPro mount SPECIFICATIONS - Sizes: 85x26x34mm - Weight: 81g without mount - Colors: Black; Gray; Blue; Red - Output: 500 lumens - Runtime: High (500LM) 2hrs, Middle 4hrs (300LM), Low 10hrs (100LM), Flash 100hrs, SOS: 100hrs - Battery: Li-Ion polymer battery (2000mAh) - Waterproof: IPX6 - Certifications: ANSI-Standard FL-1
Planet Bike's Superflash USB uses super bright LED's for visibility up to 1 mile. The ultra-compact case is weatherproof, light and durable, and features a soft-touch power switch. A USB-rechargeable lithium ion battery provides up to 36 hours of run time.
Lezyne's Femto Drive Rear is a compact, bright, and beautifully made light. The lens is made of high-grade optical material and serves as an activation button that cycles through four flash and one solid mode. The CNC machined aluminum body makes the Femto Drive durable and weather resistant while the back plate can be unscrewed to replace the two CR2032 batteries. The multi-position silicone rubber strap secures the light to a wide range of seatpost and seatstay diameters.
Start a Party! When the sun goes down, stay visible - the Monkey Light M232R turns your evening bike ride into an instant party. The MonkeyFX system creates thousands of amazing patterns in your spinning bicycle wheel. With cutting edge digital light art, the M232R is sure to get you noticed at night. The Monkey Light provides great front, rear and side visibility at any speed. It creates full color patterns on your spinning bike wheel at 10 to 40 mph (15 to 65 km/h). The 8-bit themes are instantly customizable - with on-board buttons you can choose the themes and colors to fit any situation. An included USB-powered lithium battery makes recharging convenient. The M232R is easy to mount on the spokes of nearly any bike - Road, City, Cruiser, Mountain and BMX bikes. The light is perfect for daily commuters, urban cyclists, casual evening riders - anytime you want to be visible What's included: - 1 Monkey Light M232R Bike Light - 1 Hub-mounted USB-rechargeable lithium battery (keeps wheel balanced) - 1 stainless steel anti-theft strap - 2 rubber mounting pads - 8 plastic mounting straps - Instruction sheet with 21 languages - 2 year limited warranty Specifications - 200 Lumen brightness - Power: USB-rechargeable lithium battery - Battery life: up to 12 hours - Fit: bicycle wheels 20-inch or larger. - Riding speed: up to 40 mph (65 km/h). Patterns visible above 8-10mph (12-15km/h). - Visibility: front and side visibility when mounted on front wheel. rear and side visibility when mounted on rear wheel. - Mounting: straps to spokes with vibration-proof 3-point mount. - Rugged IP67 construction designed for daily use in all weather conditions - 32 full color LEDs (16 on each side) - Battery made in China. Light made in USA
Thirty powerful micro-LEDs give the Pangolin an excellent balance of run-time and brightness. - 25 lumens - High / Low / Flash 1 / Flash 2 / Pulse - Side visibility - Tool-free installation - USB-rechargeable - Battery level indicator Run Times: - Hi-Beam: 1.5 hrs - Low-Beam: 6 hrs - Flash 1: 24 hrs - Flash 2: 27 hrs - Pulse: 4 hrs
Start a Party! When the sun goes down stay visible - the Monkey Light M232 turns your evening bike ride into an instant party. The MonkeyFX system creates thousands of amazing patterns in your spinning bicycle wheel. With cutting edge digital light art, the M232 is sure to get you noticed at night. The Monkey Light provides great front, rear and side visibility at any speed. It creates full color patterns on your spinning bike wheel at 10 to 40 mph (15 to 65 km/h). The 8-bit themes are instantly customizable - with on-board buttons you can choose the themes and colors to fit any situation. The M232 is easy to mount on the spokes of nearly any bike - Road, City, Cruiser, Mountain and BMX bikes. The light is perfect for daily commuters, urban cyclists, casual evening riders - anytime you want to be visible. What's included: - 1 Monkey Light M232 Bike Light - 1 Hub-mounted battery holder - 1 stainless steel anti-theft strap - 3 rubber mounting pads - 8 plastic mounting straps - instruction sheet with 21 languages - 2 year warranty Specifications - 200 Lumen brightness - Power: 3 x AA batteries (any type), NIMH rechargeable provide best performance - Battery life: up to 20 hours - Fit: bicycle wheels 20" or larger. - Riding speed: up to 40 mph (65 km/h). Patterns visible above 8-10mph (12-15km/h). - Visibility: front and side visibility when mounted on front wheel. rear and side visibility when mounted on rear wheel. - Mounting: straps to spokes with vibration-proof 3-point mount. - Rugged IP67 construction designed for daily use in all weather conditions - 32 full color LEDs (16 on each side) - Made in USA
Nip 500’s powerfully focused beam and ultra-compact size reinvents the e-Bike light. Maximizing output without bulk, the Nip features an optimized reflector and amber side lighting for 180 degrees of protective visibility. Designed to integrate into popular 6 to 18V on-board batteries such as Shimano and Bosch systems, multiple mounting options creates the perfect e-Bike lighting solution. Key features: - 500 lumen headlight certified to the FL-1 Standard - Engineered for seamless e-bike battery integration - Amber side lighting creates 360 degrees of protective visibility - Pulse mode for high traffic areas/day-time riding - Custom reflectors optimize beam pattern to provide efficient and effective distribution of light - Various low-profile headlight mounting options available - Taillight seat rail clamp with angle adjustment for universal mounting and effective visibility - IP67 Waterproof Rating for all conditions commuting – lights are tested to be fully submersible in 1 meter of water for 30 minutes - Designed and Assembled in California. - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee
The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it’s USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. The NiteRider Sabre 80 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye catching visibility in both day and night. With the addition of amber colored side lights, the Sabre 80 provides 180 degrees of protection. SWIFT 300 - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable SABRE 80 - Daylight Visible Flash (DVF) - 80 lumen super bright tail light - Easy on and off seat post strap mount with quick release tab - Amber side lights for 180 degrees of visibility - Convenient USB rechargeable - Be Seen by cars = Be Safe - FL1 Standard IP64, water resistant WARRANTY - The Swift 300 and Sabre 80 are both backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES SWIFT 300 - LED Head Light - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable SABRE 80 - LED Tail Light - Seatpost Mount - USB Cable
$7.99 - $8.00
Giant's Numen Mini Headlight is small, powerful, and surprisingly bright. It's so light, you can just leave it on your bars and you'll barely notice it, while drivers will notice its 2 bright LEDs as they illuminate your way. This nice light has a flexible rubber mount so you can attach it almost anywhere on your bike. It has steady and flashing modes and runs up to 100 hours on its included batteries.
The NiteRider Solas 250 uses two powerful LEDs to produce an amazing 250 lumens of light output. It features 4 modes (2 flash / 2 steady) and is USB rechargeable. We've implemented what we call "Group Ride Mode" for cyclists who want to stay visible but not distract others in the pack. - Daylight Visible Flash (DVF) - 250 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - Convenient USB rechargeable - Super bright daytime flash mode - Be Seen by cars = Be Safe - FL1 Standard IP64, dust and water-resistant WARRANTY - The Solas 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable
- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars
The LED Laser Drive rear light enhances nighttime safety by projecting "lanes" on the road behind you. Two laser lines establish your presence by creating a lane that shows motorists where you are and where you're headed. Two solid modes and five flashing modes ensure you're always seen, and recharges are made convenient through USB. Silicone rubber mounting strap included.
Seca 1800’s powerfully focused beam and ultra-compact size reinvents the e-Bike light. Maximizing output without bulk, the Seca features an optimized reflector with 4 Cree LEDs. Designed to integrate into popular on-board batteries such as Shimano and Bosch systems, multiple mounting options creates the perfect e-Bike lighting solution. - 1800 Lumen output certified to the FL-1 Standard - Engineered with the best CREE LED and enhanced firmware. - Custom engineered reflector optimizes the light to provide a smooth, even beam pattern that focuses the light exactly where you need it. - Beam pattern was engineered to maximize riders’ depth perception using optics that eliminates the snowball effect with a clean transition across the beam. - Designed to seamlessly integrate into an e-Bike's 6V to 14V on-board battery
Planet Bike's Beamer 3 Headlight boasts 3 super-bright white Nichia eXtreme LEDs with steady and flashing modes to provide excellent visibility. And, the soft-touch switch makes it easy to change settings, even with gloves on. The Beamer also features a quick-release handlebar mount that attaches in seconds without tools. Plus, the included 2 AA batteries deliver run times of up to 100 hours.
The NiteRider Lumina OLED 1200 Boost is an innovative bike light that removes the guesswork related to battery life, allowing you to plan your next ride safely with complete confidence, day or night. The OLED multifunctional digital display screen delivers precise battery run times as a percentage and actual time for the Lumina OLED's 9 lighting levels. The Lumina OLED 1200 Boost features a custom engineered collimator sense, producing a generous widespread beam pattern. With Boost Mode providing a stunning 1200 lumens of maximum light output, this makes the Lumina OLED highly capable for use when navigating through diverse riding conditions. - New Collimator Lens, distributes a generous even widespread beam - Boost Mode! Unleash maximum LED output - 5 Light Levels plus 4 Daylight Flash Modes - CREE LED at 6000k - Multifunctional OLED screen provides detailed operational information - FL1 Standard IP64, water resistant - Intellicharge – Reduce charge time in half! - Backlit buttons for easy to use interface in any lighting condition - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Convenient USB rechargeable WARRANTY - The Lumina OLED 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head with OLED Display - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for their flagship tail light, the Sentinel. It allows you to fine tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It’s an easy-on and easy-off non-slip tail light mount that also features a grooved contact pad that makes this the ‘go-to’ mount for riders using aero seatposts. - Fits standard and aero seatposts System Compatibility: - Sentinel - Solas - Sabre - CherryBomb
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Mount it to your favorite downhill/MX style helmet, or explore the versatility of your Lumina headlight by mounting it onto an industrial hard hat. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
The Pathfinder USB Headlight from Portland Design Works is unlike any other bike light on the market, incorporating technologies to help you see and be seen while riding, day or night. The Vertical Cutoff Beam is designed to focus the 200 lumen main beam onto the road in front of you and prevents lost lumens that can blind oncoming traffic. For daytime riding, the Daytime Running Flash is bright enough to make you seen even on the brightest days. The Battery Meter lets you know exactly how much battery life you have left before needing to recharge with the included USB cord. The Pathfinder includes a powerful lithium-ion battery and a darkness destroying CREE LED bulb. It provides superior luminous guidance for up to 25 hours of ride time. The rugged construction is weatherproof and strong enough to handle the abuse of an urban commute. - 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Lumens and burn times certified by Labsphere Illumia Light Measurement System to FL1 standard - Vertical Cutoff Beam to focus 200 lumens on the road ahead - CREE LED - Battery Meter for Li-ion battery - Micro USB charging cord included; 3 hour charging cycle - Weatherproof exterior for all season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Includes UV-proof quick on/off handlebar mount - Weight: 57 g (2 oz)
The Seca Series – reliable, durable, and optimized for trail use – is the ideal choice for the next epic ride with a trail optimized beam pattern and unmatched reliability. The Seca 2500 Lighthead is the perfect choice for those that already own compatible Light & Motion 3 & 6 cell battery packs and want to upgrade their existing lighthead to the premium Seca model. Features - 4 LED array with CREE LEDs - Custom engineered reflector/optics diffuses flood LED to provide ultra-wide beam pattern and focuses spot LEDs to maximize forward visibility - Additional ‘Race Mode’ feature enables riders to conveniently toggle between high and medium output - Illuminated power button with low-runtime indicator and enhanced tactile engagement specifically for gloves - GoPro mount compatibility - 50-inch rugged cord - Battery not included, compatible with Light & Motion 3 and 6-cell battery packs
- The Gino Light Mount is a small perch that allows lights to be mounted to any M5 threaded eyelet, rack mount or braze-on - Made in USA
Cricket is MSW's handy, USB rechargeable light set. They fit on most handlebars and posts and install without tools. This also makes them easy to remove for storage or charging. Includes micro USB charging cables. - Features constant, flashing and pulsing modes - USB rechargeable, Lithium-ion polymer batteries - Battery capacity/ Low battery indicator - Front: White LED with 50 lumen output - Rear: Red LED with 15 lumen output - Fits 19mm-48mm tubing - Aluminum body construction - 28g each
Page 1 of 10 Next page