Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
Power up climbs. Descend with speed and confidence. Stiff, superlight, and built with proprietary technologies, the SLR 0 30 delivers efficiency, control and durability in a stiff, lightweight and race-ready package. Features - Ultralight 30mm deep full-composite rim brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - DT Aerolite/DT Aerocomp straight-pull bladed stainless spokes- 21H Front & 24H Rear - Alloy locking nipples - Giant alloy hub shell with Star Ratchet driver system - 1298g per pair
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
$19.99 - $24.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6mm hex wrench required for installation
Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks. -Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs -100 mm front hub spacing only -CNC-machined AL-6061
$92.00 - $109.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.
Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.
XD is a cassette driver body that allows the use of a 10-tooth small cog and provides an improved interface with the cassette on your SRAM Rise 60 wheels. • Driver body design that lets riders tap the power and range of the SRAM 10-42 11-speed Cassette and a 10-tooth small cog • Provides a stable hub connection
- Decals for replacement rims
- Colored rim decal kits to personalize your ride - Decals to fit two (2) 70w 26-inch rims
Keeping the front wheel securely on the bike is kinda important. This WeThePeople Arrow Front Hub Female Bolt Set keeps your wheel right where it belongs. Sticking the nose manual is up to you.
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs - Type: Solid Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 174mm - 1 axle per bag
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 135mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 146mm - 1 axle per bag
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 155mm - 1 axle per bag
- Colored rim decal kits to personalize your ride - Decals to fit 2 100w 26-inch rims
Replacement XD driver freehub body for Vantage and Trail non 2-piece V2 Ritchey hubs. - SRAM XD
- Lock and unlock with special key - Lightweight aluminum key is easy to carry - Anti-rust CrMo axle, stainless steel springs
Surly Ultra New Axle Kits are for upgrading the internals of your existing Surly New hubs or replacing the internals on your Surly Ultra New hubs. -Compatible with Surly New hubs (upgrade kit) and Surly Ultra New hubs (replacement kit) - Each kit contains an axle, two 6901 cartridge bearings, two aluminum dust shields, two stainless steel cones, two stainless steel 6x1mm bolts, and two stainless steel bolt washers - Axle is quick release and bolt-on compatible; bolts included, QR is NOT included - Standard Surly New hubs come stock with 7901 bearings; this kit uses 6901 bearings which are non-angular
Authentic replacement freehub body for Ritchey V2 Apex and Zeta Phantom Flange road wheels - 10/11-speed Campagnolo
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 9mm x 1, front "parallax" style hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 11.0mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech 9mm x 1, front "parallax" style hub - Taiwanese hubs with 9mm x 1 axle
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - 22mm metal dust seal is pressed on cone - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 11.4mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Nexave HB-T400 Front - Shimano Deore HB-M510 Front - STX HB-MC32/30 Front - STX Parallax Front
Adjustment clamps are used to adjust bearing preload on Chris King hubs. - Includes one High Profile (HP) Adjustment Clamp - Fits all Chris King ISO/Disc Rear Hubs
$64.99 - $69.99
Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready with strong tire retention bead
• Grade 3 balls and magnetite rust proof finish • Abec 5 precision and silicone w seals • 3 times cryogenic race treatment • Bearings sold individually, not as pair
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25-inch to 2.5-inch tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5-inch Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail tires
- Double butted 2.0/1.8/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 192g @ 32h/265mm - Box of 100 - Nipples sold separately
- USB and Cult ceramic renewing kits can be used to upgrade Campagnolo wheels that come stock with stainless steel bearings - Kit includes (2) each of dust seals, hub cones, hub cups, and ceramic or steel ball bearings
Page 1 of 19 Next page