Chains

SRAM’s premier 10-speed chain features hollow pins and cut-out outer plates for accurate shifting in all conditions, light weight, strength and smoothness. Plus, it's compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation and removal is a snap.

SRAM's PC 830 Chain offers accurate shifting, excellent durability, and superior power transfer for 8-speed drivetrains.

The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.

SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.

SRAM's PC-1 Single Speed Nickel Chain is designed for singlespeed bicycles so it won't jump off when you're laying down the power. It comes with a connector link for easy installation and removal.

- 1/2" x 11/128" - 116 Links - EPT anti-rust coating - 9-speed - Compatible with Shimano, SRAM & Campagnolo 9 Speed Systems - Mushroomed Pin Riveted - 277 grams

The Flattop technology of the SRAM Rival chain creates a lighter, quieter, stronger chain that's compatible with 12-speed 1x and 2x eTap AXS drivetrains. Ride far, long, and fast. This chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Use for both 1x and 2x eTap AXS - Includes Flattop PowerLock

Shimano Tiagra CN-4601 10-Speed Chains - For Ultegra 6703 and 105 5703 triple drivetrains, please see 10-Speed Hyperglide non-directional chains - Hyperglide 10-Speed chain - Not compatible with Shimano 10-Speed Dyna-sys mountain bike drivetrains - Directional inner and outer plates designed for better contact with gear teeth allow smooth shifting even under high load conditions - Chromized rivet pins improve wear resistance - Perforated plates for reduced weight - 116 links

With SRAM's X1 Chain, it's 1x11 all the time, so the chain can be narrower, stronger, faster — all because it doesn't have to deal with high-stress, front chainring shifting. Since it only has to do rear shifts, gear changes are telepathically fast and feathery light. Its "wide tooth, narrow tooth" pattern perfectly matches SRAM's X-Sync chainrings so dropped chains and cumbersome chainguides are a distant memory. The durability is impressive, too, with SRAM's Hard Chrome tech, solid pins and a proprietary link finish for improved life span.

- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation - Width = 11/128-inch

- X101: hi-performance, chamfered, anti-drop, lightweight, Singlespeed chain for Mountain, BMX, Fixie, Track applications - Z410: bushingless design for normal BMX and Singlespeed use - Z410HD: heavy duty model has thicker sides plates for 25% higher tensile strength than Z410 - Z-710: specially shaped, extra-thick outer plates and bulls-eye riveting for frequent grinding - S10: stainless steel construction great for electric bikes, internal gear hubs, and beach cruisers - Width= 1/8-inch

SRAM’s 11-speed chain features heavily chamfered outer plates for improved shifting and quiet running. And, with its great PowerLock connecting link, installation and removal is a snap.

For smooth shifting and a quiet drivetrain, pick up Campagnolo's Chorus 11-speed chain. It's unidirectional for unparalleled function and features lightweight hollow pins as well as an anti-friction treatment for shifting perfection. It also boasts excellent wear and flex resistance.

- 1/2" x 3/32" - 116 Links - EPT anit-rust coating - 8 speed - Compatible with 18-21 24 Speed HG - Mushroomed Pin Riveted - 286 grams

The KMC Z1eHX chain is suitable for a variety of single speed riding styles, such as BMX and fixed gear, fitness bikes, track bikes, internally geared hubs, and eBikes. - Features a heavy duty structure and stretch proof treatment for high pin power with reinforced durability - Anti-drop design reduces possibility of chain drop - eBike compatible - Links (links): 112 - Width: 7.8 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Single Use Master Link - Designed for ebike: Yes

- HG technology has chamfered inner plates to optimise shifting performance on HG sprockets - Durability is assured through the heat treatment of rollers, pins, and plates - Includes connecting link - Weight: 335 grams

The KMC Z8.1 Rustbuster is an 8-speed chain suitable for trekking, MTB, and city touring. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Z bridge outer plate offers extended compatibility - Rustbuster coating provides anit-rust protection - Links (links): 116 - Width: 7.1 mm - Drivetrain Speeds: 8 - Chain Connection Type: Reusable Master Link

The Cult half link chain features teflon coating engraved with cult logos and is designed to help dial in the rear end length on frames with short dropouts. - Rounded side plates are compatible with 8T and larger drivers - Color: Black - Width: 1/2 x 1/8 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes

Designed from a long line of dependable, lightweight chains that are built for toughness, the recommended chain for APEX 1, PC-1110. Designed with SRAM’s trusted XX1 geometry, the PC-1110 features solid pin construction, 11-speed PowerLock and smooth, efficient shifting that you can count on every time out. - Optimized to work with X-SYNC rings for precise and dependable 11-speed performance - Fully compatible with all SRAM 1x drivetrains - Closing Link: PowerLock - Outer Plate: Polished grey - Inner Plate: Polished grey - Pin Treatment: Chrome Hardened - Weight: 232 - 273 grams - Rivet Type: Solid Pin - Speeds: 11

This chain uses 3 surface treatments for a long lasting and smooth running chain. Compared with standard bicycle chains the lifespan is expected to be double your standard mileage. - DHA hardening for a service life up to 8000 km/4900 miles - Ni-PFTE treated to reduce friction - Ti-Nitride coating provides a durable and long lasting finish - Chamfered inner and outer plates to smooth out and reduce shifting effort - Includes one QRS reusable master link and one traditional chain pin - Laser cutouts and hollow pins to reduce weight - Links (links): 116 - Color: Black - Width: 5.9 mm - Drivetrain Speeds: 10 - Chain Connection Type: Reusable Master Link - Weight: 242 g

Beyond an incremental improvement. The Flattop technology of the SRAM Force chain creates a lighter, quieter, stronger chain. Ride far, long and fast—this chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts

Z6 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.3 mm - Drivetrain Speeds: 6 , 7 - Chain Connection Type: Reusable Master Link

- SLX/105 chain 11-speed chain - Sil-Tec surface treatment on roller plates only - Weight: 257g - Now with quick link - Refer to Documents and links to find the right product

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

11 speed eBike chain to stand up to the high torque of a motor. - Built strong for your eBike - Compatible with Shimano, SRAM & Campagnolo 11 Speed Systems - Mushroomed Pin Riveted - 1/2" x 11/128"

Odyssey Bluebird chain is the proven and reliable KMC 510-HX chain with an added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit. - Proven and reliable KMC 510-HX chain - Factory installed half-link for a radically stronger set-up

- Links (links): 136 - Defined Color: Silver - Color: Silver - Designed for ebike: Yes

The KMC e1 Chain is suitable for single-speed riding styles such as eBike, track bikes, and internally geared hubs. - Maximum durability for eBike usage with unparalleled rigidity and strength - Added chamfering for smooth operation - Double X bridge shape for precise gear shifting - Mushroomed riveting provides high pin power - Inner plate chamfering allows for expeditious shifting

SRAM's PC-870 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth and reliable, the PC-870 will take you where you want to go.

It might look normal from the outside, but the engineering inside this incredible chain design is anything but normal, and it makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle drivetrain’s ultra-smooth, precise, durable and quiet performance. The Eagle chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. HARD CHROME technology extends the chain’s optimal performance life.