Helmets

Strap divider for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon

Strap divider for thin Lazer helmet straps COMPATIBILITY - Bullet 2.0 - G1 MIPS - G1 - Z1 MIPS - Z1 - Century MIPS - Century - Victor - Wasp Air Tri - Impala - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon

Buckle for thick Lazer helmet straps. COMPATIBILITY: - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - WEIGHT: 5g - MATERIAL: Nylon

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

Replacement Pads for Lazer's BOB Helmet

Screws for Impala visor. - COMPATIBILITY: Impala MIPS, Impala - WEIGHT: 1g - MATERIAL: Aluminum

Freshen up the interior of your helmet with a new pad set! - Replacement pads for Jackal helmets

Screws for Jackal Visor

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Camera mount for Jackal and Impala helmets. - COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala - ATTACHMENT: Velcro - WEIGHT: 13g - MATERIAL: Nylon

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad. - COMPATIBILITY: Cameleon MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Coyote and Coyote MIPS helmets. Set includes three pads - One front/top pad and two top side pads. - COMPATIBILITY: Coyote MIPS, Coyote - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Freshen up the interior of your helmet with a new pad set! Replacement padset for Lazer Urbanize MIPS helmets. Set includes two pads - one front pad and one top center pad COMPATIBILITY - Urbanize MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

- Replacement X-Static pads for Lazer's Wasp Air Helmet - X-Static pads are an anti-microbial, self-cleaning pad system

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System. - COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS - BATTERY TYPE: LR41 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: ATS dial - WEIGHT: 15g - MATERIAL: Nylon

Visor for Impala helmet COMPATIBILITY - Impala MIPS - Impala - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS - ATTACHMENT: Blade or Blade+ helmet - WEIGHT: 45g - MATERIAL: Polycarbonate

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: G1 MIPS, G1 - ATTACHMENT: G1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Z1 MIPS, Z1 - ATTACHMENT: Z1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate

Strap dividers for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - MATERIAL: Nylon

The Chakra Child features Kali's Composite Fusion technology, in-mold construction, and extended rear coverage for added safety and protection. A visor molded directly into the shell and a dial closure system will give any child the confidence and motivation to get out and ride. - Washable, anti-microbial, moisture wicking pads - Polycarbonate shell with EPS foam - Integrated visor - 21 vents provide maximum airflow

The Shadow Classic Helmet is constructed with a high-impact ABS hard shell with a light EPS core liner for even distribution of force upon impact. - ABS Hardshell construction with light EPS core liner - Includes two sets of padding for a custom fit - CE and CPSE certified - Shadow Crow Head rivets and Classic woven label - X-Small = 46 – 50cm - Small/Medium = 50 – 56cm - Large/X-Large = 56 – 61cm - XX-Large = 61 – 65cm

Thoughtfully designed so you can spend more time adventuring with your child and less time fiddling with gear, the unisize Nutz helmet incorporates kid-friendly details to provide confidence-inspiring protection for little ones graduating to balance bikes or first pedal bikes. Make gearing your child up for their ride fast and painless with a cleverly positioned cheek buckle that avoids tearful skin-pinching under the chin. Nutz features an automatic EZ Fit system that continues to adjust with your child as they grow and provides a secure fit in seconds with no pressure points or hot spots. Designed with deeper coverage around the sensitive temple area to offer more protection against accidental bumps and tumbles, as well as a built-in insect net for plenty of airflow while keeping critters out, this lightweight helmet is certified by the Consumer Products Safety Commission (CPSC) for children ages 5 and up. Enjoy peace of mind watching your little shredder learn to ride and leave the protection up to us. Better by design, KinetiCore is the world's first responsibly designed and fully Integrated Rotational Impact Protection technology that's built right into the helmet instead of added on after. - WEIGHT: 250g - MATERIAL: EPS Foam, Polycarbonate, Nylon - FIT SYSTEM: EZ Fit - VENTILATION: 12 - ROTATIONAL PROTECTION: Lazer KinetiCore - CERTIFICATION: CPSC - ACCESSORIES: Optional Universal LED Features: Less Pinches, Less Tears Skip the chin-pinching drama with a child-friendly cheek buckle. Easy Fit No-fuss Automatic EZ Fit system makes finding a secure fit effortless. Just open it, put the helmet on, and it'll automatically adjust to provide the right fit for your child. No More Bugs A built-in insect net keeps bugs out while letting the breeze in, minimizing distractions and irritations. Integrated Rotational Impact Protection KinetiCore Controlled Crumple Zones absorb the force of both direct and rotational impacts in the event of a crash to re-direct energy away from your head, protecting you when you need it most. LED Light Compatible Increase visibility by attaching the Universal Lazer LED to the back of the helmet, so your child can be seen in all light and weather conditions. Increased Coverage Tip-overs happen. This helmet provides increased coverage around the temples, offering extra protection across the head's most sensitive area. Unisize One size fits all. The helmet shell and fit system is designed to accommodate a wide variety of head sizes and shapes. Lightweight Design Built 22% lighter than the previous Lazer Nutz MIPS helmet and with less plastics, its reduced carbon footprint design provides top-rated protection without unnecessary weight.

MORE PROTECTION. The snazzy exterior design will leave you with compliments on more than just your riding style. Dent-resistance will give you peace of mind when you’re stashing, stowing and journeying with your helmet. You get the option to switch out the removable visor for your favorite cycling cap or snap it back in place for riding in bright sun or rain. The ultra-safe and durable in-mold shell is now designed with a deeper rear profile for additional protection at the back of the head. FEATURES - Snap-on removable visor - In-mold all-in-one construction for impact-absorbing strength, ultimate durability, and crash protection - 360° Full Surround automatically positions the helmet correctly - Easy dial-adjusted fit belt snugs the helmet to the head - 17 vents bring in cooling air to circulate over and around the head to regulate temperature - Certifications: CE/CPSC/AS

Packed with features to keep riders comfortable and safe including MIPS to keep your young rider extra safe. The AirFlow Ventilation System provides cooling airflow, an in-mollded polycarbonate shell gives protection and an integrated magnetic light mount allows you to add a rear light for increased visibility. - Designed with fit and function in mind to create a value-packed helmet to keep young cyclists comfortable and protected - TransTextura Plus anti-microbial padding helps fight bacteria growth and reduce odors - Low and high speed impact-tuned construction with optimized low-density EPS - New Cinch Jr. fit system offers optimal coverage by cradling the head for full protection - Removable visor - Integrated magnetic mount for the Numen+ Link taillight (#400000143) - MIPS mimics the brain's own protection system by adding a low friction layer between the head and the helmet reducing rotational movement that causes strain to the brain at angled impacts

- In-molded construction - TransTextura moisture-wicking, anti-odor inner padding - MIPS Protection Sizing: - Small/Medium = 49 – 57cm - Medium/Large = 53 – 61cm

The Chakra Solo builds on Kali's best-selling Chakra line of helmets. Featuring Composite Fusion technology, a lower polycarbonate wrap and an integrated bug liner for those fast turns just earned. - Anti-microbial pads - Breakaway visor - PC shell and with EPS foam - Dial-Fit closure - 21 vents for maximum airflow - Simple graphics, and gloss finish